APRILIA RSV4 FACTORY: Technical Specifications
Engine type
Aprilia longitudinal 65 V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder
Fuel
Unleaded gasoline
Bore and stroke 78 x 52.3 mm
Total engine capacity
999.6 cc
Maximum power at crankshaft
180 horsepower @ 12,500 rpm
Maximum torque at crankshaft
84.8 ft/lb @ 10,000 rpm
Induction and fuel system
Variable length intake ducts controlled via ECU.
4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion:
- Track
- Sport
- Road
Ignition
Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and "stick-coil"-type coils
Exhaust system
4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)
Alternator
Flywheel mounted 420W alternator with rare earth magnets
Lubrication
Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Gearbox
6-speed cassette-type gearbox
1st: 39/15 (2.6)
2nd: 33/16 (2,063)
3rd: 34/20 (1.7)
4th: 32/22 (1.455)
5th: 34/26 (1.308)
6th: 33/27 (1.222)
Clutch
Multi-disc oil-bath, with mechanical slipper system
Primary drive
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
Secondary drive Chain:
Drive ratio: 40/16 (2.5)
Chassis
Twin-spar adjustable aluminum frame, with castings and pressings.
Envisaged adjustments:
* headstock position and rake
* engine height
* swingarm pivot height
Ohlins adjustable steering damper
Front suspension
Ohlins Racing upside-down fork, 43-mm stanchions (with TiN surface treatment). Low profile forged aluminium radial caliper mountings. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm
Rear suspension
Twin sided aluminium swingarm; mixed low thickness and sheet casting technology.Ohlins Racing monoshock with piggyback with completely adjustable: spring preload, wheelbase and hydraulic compression and rebound damping. APS progressive linkages. Wheel travel: 130 mm
Brakes
Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminum flange with 6 pins. Brembo monoblock radial calipers with 4 34mm opposing pistons. Sintered pads. Radial pump master cylinder and metal braided brake hose
Rear: 220mm diameter disc; Brembo floating caliper with two 32mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose
Rims
Aprilia forged aluminium alloy rims, completely machined, 5 split spokes.
Front: 3.5 x17 inch
Rear: 6.0 x17 inch
Tyres
Radial tubeless.
Front: 120/70ZR 17
Rear: 190/55ZR 17 (alternative: 190/50ZR 17)
Dimensions (default settings)
Max. length: 2040 mm
Max. width: 735 mm (at the handlebar)
Max. height: 1120 mm
Min. height from the ground: 130 mm
Saddle height: 845 mm
Centre to centre distance: 1420 mm
Trail: 105 mm
Steering angle: 24.5
Kerb weight
179 kg (394.6 lb)*
Tank
17 litres (4-litre reserve included)
*Dry weight, without battery and fluids.