With the launch of the 1992...
With the launch of the 1992 FireBlade, Tadao Baba not only revolutionized the sportbike world, he also started a dynasty of machines that continues to this day.
One specific area that anyone involved in the FireBlade project remembers as being especially controversial was the front fork. In the late 1980s, inverted forks were starting to become an important fashion accessory on production bikes. Not one for following trends, Baba simply pointed out that they were heavier than conventional forks and refused to put an inverted fork on the bike, although he did reach a compromise — he designed a conventional fork that looked like an inverted item! A few years later Baba did concede that technology allowed the use of inverted forks. “I was pleased to see inverted forks finally on the FireBlade, but only when weight technology meant they were lighter than conventional units!”
Despite being an “old-school engineer”, Baba’s time in the R&D area also saw him introduced to the latest cutting-edge technology, something he embraced and brought into the FireBlade project. The Blade was the first road bike designed by Honda using CAD technology and the theory of mass centralization, techniques that are commonplace nowadays in motorcycle design. It is this use of technology that Baba cites as the critical factor in the FireBlade’s design, the part that made it stand out from the crowd and helped it become so revolutionary.
Baba: “I own a 2002 FireBlade 954, it was the last model of FireBlade I designed and in my opinion it is the best Blade as a total package. The first Blade has the best image and memories for me, but the final one is probably the best.” Baba remained personally involved in the FireBlade’s development until 2004 when he retired from Honda at the age of 60 and handed the project over to Kyoichi Yoshii. “When I gave the FireBlade project to Kyoichi it felt like the day when my son left home. But the FireBlade has many brothers all over the world so my image of the Blade lives on.”
By summer 1989, less than two years after taking the reins of the FireBlade project, the first prototype was ready to be tested at the Suzuka race circuit. While the test riders were blown away by the machine’s performance, Baba was always confident that the FireBlade’s design would work. Before the riders took to the circuit, Baba stood in front of them and made the announcement, “Gentlemen, today you are going to ride a bike that will change the face of supersports.” Was he really that sure? “The results were in line with expectations,” is his simple response.
Throughout the FireBlade’s development, Baba was anything but a typical Japanese designer who stood at the back of a garage clutching a clipboard. Baba was much more likely to be found out on track, lapping with the test riders and more often than not ending up in the gravel. There is a joke amongst the test team that Baba has a magnetic attraction to the gravel traps — something he doesn’t dispute. “I have heard I have a reputation as a crasher,” he laughs. “Some of our test riders think I have crashed every model of FireBlade. I think maybe just four or five. I have also crashed some bikes that weren’t FireBlades as well, an R1, YZF…”
Winning a TT…
Phillip McCallen won the 1996 and 1997 Production TTs on a FireBlade. He was also an R&D rider for the 1992 Blade and heavily involved in the bike’s evolution. “There was so much pressure on me to win the 1996 Production TT. Because I had been involved with the development I felt like I had to prove that the FireBlade was the best production bike in the world. I had to wait four years after the bike’s launch because Production racing had been dropped after a series of bad accidents, but in 1996 I had the chance to stamp the Blade’s authority over the competition as the class was re-introduced.
“I remember starting the race and I was down a couple of seconds at the first signal points, but at that time I was doing five TTs, jumping from a 250 to a proddy to an RC30 or RC45 so it took a while to get adjusted to the Blade again. I remember I took off on a jump after Ginger Hall and the bike landed sideways. I fought that hard to straighten it I actually twisted the yokes around by about 20 degrees — and that was in the first lap! From then on every time I hit a jump I had to guess the angle to hold my hands at so the wheel would land straight on the road. Crossing the line was a fantastic feeling, the best in the world. Mr. Baba and Dave Hancock were in the pits when I returned and Mr. Baba had the biggest smile on the whole island. We had all developed the bike together and the TT win meant so much to everyone involved in the project. To be honest I don’t know what I would have done if I had lost that year, losing wasn’t an option — it was do or die!”
What does Tadao Baba do in...
What does Tadao Baba do in his retirement? “I write a monthly column for a Japanese bike magazine and I play a lot of golf, but golf is very difficult and motorcycle riding is very easy so I also like to ride.”
Honda, in recognition of Baba’s enormous achievement, actually changed the FireBlade’s name. All bikes made post-Baba have a small “b” in their logo in honor of the great man. And it didn’t stop there: In 2004 Honda threw Baba a leaving party, Honda Europe funded a tour around Europe, and Honda Japan presented him with a wooden plaque with a piston from every model of FireBlade mounted on it — something that takes pride of place on a shelf at his home in Japan.
Finally, there is one Baba rumor that needs to be cleared up. Is it true that he used to sneak into the Honda factory, go to the production lines and write messages to future FireBlade owners? “Ha, yes that is true. Just on 2004 and 2005 models. I would write ‘ride safe’ and ‘enjoy’ in Japanese on the inside of the fairing.” SR